|
|
|
|
|
|
|
|
|
|
|
|
|
Mag Pad
Two Magnetic Cutter Pads per package. 3″ x 15″ x 1/4″
Solve the problem of marking carbonless forms with your cutter clamp.
Attach this magnetic-backed foam pad to your clamp to prevent marking. Easy on and off.
|
Blade Protective Edge Carrier,
Designed for 17.7" to 18.1" Cutting Machine Blade,
Used for storage or shipping of blade for sharpening
|
"Challenge" style spine clamp hold downs or book clamp for use on the guillotine paper cutter back gauge. These spine clamps keep books and other stitched booklets flat for accurate and square cutting. They are very effective at assuring an even cut by holding down the spine of a book while it is pressed against the back gauge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blade Protective Edge Carrier,
Designed for 18.9" to 19" Cutting Machine,
Used for storage or shipping of blade for sharpening
|
Blade Protective Edge Carrier,
Designed for 20 to 22" Cutting Machines,
Used for storage or shipping of blade for sharpening
|
Extra long "Challenge" style spine clamp hold downs or book clamp for use on the guillotine paper cutter back gauge. These spine clamps keep books and other stitched booklets flat for accurate and square cutting. They are very effective at assuring an even cut by holding down the spine of a book while it is pressed against the back gauge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mag Pad
Two Magnetic Cutter Pads per package. 3″ x 19″ x 1/4″
Solve the problem of marking carbonless forms with your cutter clamp.
Attach this magnetic-backed foam pad to your clamp to prevent marking. Easy on and off.
|
Blade Protective Edge Carrier,
Designed for 26 to 28" Cutting Machine Blade,
Used for storage or shipping of blade for sharpening
|
Paper Jogging Block
A fully assembled jogger block made of ¾“ heavy-duty Kimoplastic™. Strong magnetic base and a face assembled at a perfect 90° angle help jog bottom sheets perfectly and align paper stocks for square, precise cuts. A rounded handle and easy sliding capabilities reduce operator fatigue and provide a natural grip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Paper Jogging Block
A fully assembled jogger block made of ¾“ heavy-duty Kimoplastic™. Strong magnetic base and a face assembled at a perfect 90° angle help jog bottom sheets perfectly and align paper stocks for square, precise cuts. A rounded handle and easy sliding capabilities reduce operator fatigue and provide a natural grip.
|
TRANSFER SLIDE SKI BOARD FOR PRODUCT TRANSFERS
For use on over-boarded steps, ramps, or moving heavy objects down a flat surface.
- THICK, SANDED AND SEALED WOOD TRANSFER SKI BOARDS ensure easy frictionless transfers. Each durable board has tapered ends and is evenly sanded and sealed with a smooth surface coating to prevent cracks, chips, or snags.
- PRODUCT SPECIFICATIONS: Made of Scotch Pine. Overall Dimensions are 32"-42" x 28"-34" x 1". Weight Capacity: 735 lbs
- Size Designed for cutter width purchased.
|
Angle Cutter Guide Used for cutting angles, corners, tags, etc.
This aluminum angle-cutting guide is quick and easy to install. The two clamps attach to the paper cutter's back gauge ribs. (The same way a paper cutter book clamp would attach.) Once it is secured in place it will not slip out of position, as some single clamp guides are prone to do. It is fully adjustable for cutting any angle from 0 to 90 degrees. Once it is set in position on the backgauge, it will allow for repeated cuts at the same angle. It measures 2-5/8" high (67 mm high). A box end wrench is included with each angle guide to aid in installation and adjustment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Paper Jogging Block
A fully assembled jogger block made of ¾“ heavy-duty Kimoplastic™. Strong magnetic base and a face assembled at a perfect 90° angle help jog bottom sheets perfectly and align paper stocks for square, precise cuts. A rounded handle and easy sliding capabilities reduce operator fatigue and provide a natural grip.
|
DK Amperage Reader
This reader is the first in its class designed to double the life of your paper cutter.
Knowing when your cutter is working extremely hard cutting paper because of a dull knife can double the life of your cutter. When the amperage is at a peak on the cut it is time to change the blade. When your cutter is cutting paper the average amp draw is 9 amps, as the blade becomes dull the motor works harder to get the blade through the paper. This puts a great deal of extra force on the motor shortening its life. Knowing when to change the blade doubles the life of the cut motor. When the amperage draw hits 14 amps it is time to change the blade.
|
Paper Jogging Block
A fully assembled jogger block made of ¾“ heavy-duty Kimoplastic™. Strong magnetic base and a face assembled at a perfect 90° angle help jog bottom sheets perfectly and align paper stocks for square, precise cuts. A rounded handle and easy sliding capabilities reduce operator fatigue and provide a natural grip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ultra Heavy Duty Casters for your Paper Cutter Cabinet Stand
- Heavy Duty Industrial Caster Set
- 2 Locking Casters
- 2 diameter 150 lb Capacity Each
- Handles up to 600lbs
|
Paper Jogging Block
A fully assembled jogger block made of ¾“ heavy-duty Kimoplastic™. Strong magnetic base and a face assembled at a perfect 90° angle help jog bottom sheets perfectly and align paper stocks for square, precise cuts. A rounded handle and easy sliding capabilities reduce operator fatigue and provide a natural grip.
|
|
|
